OXR Series Installation Steps - How to install the front control arms for Chrysler 300C 2005-2010

🛒Buy Now: https://www.maxpeedingrods.com/produc... https://www.amazon.com/dp/B0F8H4D888 This video walks you through the process of installing Maxpeedingrods OXR suspension components. Designed as a direct-fit replacement, Maxpeedingrods struts match OEM specs to ensure proper ride height and handling. This repair was done on a Chrysler 300C The process should be similar on the following vehicles: Compatible for CHRYSLER 300 2005 - 2010 RWD Models; Non-Adjustable Ball Joints compatible for DODGE CHALLENGER 2008 - 2010 RWD Models; Non-Adjustable Ball Joints compatible for DODGE CHARGER 2006 - 2010 RWD Models; Non-Adjustable Ball Joints compatible for DODGE MAGNUM 2005 RWD Models; Non-Adjustable Ball Joints compatible for DODGE MAGNUM 2006 - 2008 R/T, SE, SXT; RWD Models Tools Needed: Ball joint separator Bushing set for steering knuckle bushings Slip joint pliers Pipe wrench Pliers Flathead screwdriver Phillips screwdriver Small Phillips screwdriver 7 mm wrench 8 mm wrench 21 mm wrench 22 mm wrench 24 mm wrench Electric impact wrench Large extension bar Torque wrench Torque wrench Large pry bar Breaker bar Hammer Medium extension bar Medium impact wrench Medium ratchet wrench Small ratchet wrench Pry rod 12 mm hex key External snap ring pliers Large 10 mm socket Small 10 mm socket Medium 10 mm socket Large 13 mm socket Large 8 mm socket Large universal joint Large 15 mm socket Large short extension bar 22 mm socket Large-to-medium adapter Medium-to-small adapter with 8 mm socket 15 mm socket 21 mm socket 22 mm socket 19 mm socket 18 mm socket ⚠ Important Note: The content in this video is intended for general guidance and educational purposes only. While Maxpeedingrods makes every effort to ensure accuracy, all vehicle repairs and installations should be performed with proper knowledge, tools, and safety precautions. Working on your vehicle involves inherent risks. Always consult your vehicle’s service manual and, when in doubt, seek assistance from a certified technician. Maxpeedingrods is not responsible for any injury, damage, or loss resulting from the use or misuse of the information provided in this video. Follow Us :    / @maxpeedingrods     / maxpeedingrods