Nürburgring Nordschleife Mazda RX-7 FD3S onboard 8:14 BTG

Touristenfahrten 17.04.2015 ride a fun lap onboard with me... didnt drive the track for almost 2 years, this is my 4th lap of the week.the damping setup was not finished by that time. i was messing around a bit,due to the traffic there was no possibility to do a good lap. but i think it shows the potential of the car quite good. specs: engine rebuilt by Hayward Rotary in April 2011 (about 27000km now) Apexi Power FC with Commander Garrett T04E Single Turbo HKS Mushroom Air Filter HKS Cast Manifold HKS 3" Down Pipe 50mm external HKS Wastegate plumbed back into Downpipe complete 3" catless exhaust with resonator and muffler walbro intank fuel pump (255l/h) 550cc Primary Injectors 1680cc Secondary Injectors KG Parts Fuel Rail Fuel Pressure Regulator Air Pump Removed & a/c removed & spare wheel removed battery relocated in the trunk big radiator and big intercooler v-mount custom power steering cooling pipe Polished Lower Inlet Manifold modified greddy elbow and custom intake piping modified Blitz SS BOV Engine Damper Exedy Stage2 Clutch (fitted 2010!!) re amemiya ignition amplifier NGK BR10EIX plugs magnecor competition plug wires still no boost controller (about to come) peak boost around 0.9 bar / hold boost around 0.8 bar (should be close to 350 bhp and about 400nm of torque) almost complete pu bushes all round megan racing toe ends in the front / megan racing toe arms in the back XYZ racing spec coilovers (spring rate 20kg front and rear) ST suspension sway bars improved racing sway bar links setup (wheel alignment and height adjustment on a wheel scale) done by Raeder Motorsport yokohama advan AD08R tyres (235/45/17 front & 255/40/17 back) on buddy club p1 racing wheels stock 4 pot calipers with CL RC6 pads and dba 4000 series 6x6 wiper slot discs in the front. (i used 1 and a half set of pads in 10 laps!!)...need something better ebc 307+ racing brake fluid & braided steel lines yellow stuff pads and hawk discs in the back oil temperature/pressure gauges innovate wideband lambda control with afr gauge checked 1295 kg with a full tank of gas and me sitting in it (!) i still have probably forgotten some things...