Tascam Model 12 - Part 1 "Features you may not know about"

I decided to do a couple of videos on the M12. In particular, for those who just bought one or never read the manual. This is Part 1 of 3. In this video I go over 20+ Features you might not know about. In Part 2, I cover 10 Tips & Tricks you might find helpful and in Part 3, I go over what I Love, Hate and Wish the M12 could do. Index: 00:00 Introduction 02:15 Overview 06:08 #1 - Differences between the Mic and Line preamps 07:31 #2 - Record on Live or MTR mode 08:15 #3 - Record on the M12 and your computer (DAW) at the same time 09:17 #4 - Pause in the middle of a recording 10:16 #5 - Use Mark to mark multiple song locations from a song set 11:20 #6 - How to automatically repeat a song or S1 (stop it) at the end 12:55 #7 - Press Post Rec to record after Main (Useful for fade outs) 13:46 #8 - Press SD Main Mix to here your 2 track playback 14:37 #9 - Apply Master EQ to your 2 track mix down 15:52 #10 - Setup headphone Pre or Post Main 16:47 #11 - Record or not Compressor/EQ to an individual track 17:36 #12 - Send Aux 1 Pre or Post fader 18:29 #13 - Set Solo mode PFL or AFL (Solo in place) 19:38 #14 - Invert Phase if needed 20:12 #15 - SWAP (Move) Tracks around 21:54 #16 - Use Midi to control outboard Midi devices (Drum machine, synths) 22:23 #17 - Use VAMP as a looper 22:41 #18 - Save Effects and Time Delay settings in the Library 23:08 #19 - Use the digital GAIN Boost to boost weaker mics signals (ie; ribbon mics) 24:03 #20 - Normalize tracks recorded too hot 25:22 #21 - Return computer audio (DAW) to either tracks 1&2, 9&10 or Main 26:26 Conclusion