[DOMOTIQUE] 🔨Installation d'un ROBOT TONDEUSE à FIL périmétrique Redkey MGC1000

🧰 I'll show you how to install a perimeter robot mower (with a cable). It's very easy. 🔨 Are you wondering if you can install a robot mower on your own? 👉 This video will help you understand how to install a latest-generation perimeter robot mower. 👉 You'll see, it's very simple if you pay attention to 2 or 3 things. 🛠️ ON THE PROGRAM: 00:00 – Intro 00:45 – Quick Unboxing 01:15 – Features of the REDKEY MGC1000 01:50 – Installing the CHARGING BASE 02:30 – Installing the Perimeter Cable 03:10 – Repairing a Torn Cable 03:30 – The Dedicated Smartphone App 04:20 – Cutting Height Adjustment 04:30 – How Long Does It Take to Install? 05:00 – The Difficulties You Face Waiting for you 05:15 – Base stability 05:30 – Cutting efficiency 06:00 – Blades wear out 06:15 – Measure the perimeter correctly 06:30 – Level variations 07:25 – Slopes 07:40 – Ground obstacles 07:50 – "Classic" obstacles 08:10 – "Special" obstacles 09:15 – My conclusion and my advice 📺 ADDITIONAL VIDEOS (optional): 🔹 Playlist on campervan repairs:    • Playlist   🔹 Playlist on car repairs:    • MÉCANIQUE AUTOMOBILE - Diagnostic Entretie...   💬 GIVE YOUR OPINION: Have you ever tried this type of robot lawn mower? Do you have a more advanced or less advanced robot? I'm interested in your experience? I read all comments and will respond as soon as possible! 🧰 TOOLS / MATERIALS used in my video: Redkey MGC500: https://bit.ly/4kv0haD Redkey MGC1000: https://bit.ly/3Iwg9Ms Even though this robot is rated for a 1000m² area, it doesn't accept a cable longer than 180m, so check your perimeter carefully if you decide to purchase this product. 🌍 More tools and tips: www.pmbricoleur.fr 📌 DON'T MISS A THING: ✅ Subscribe to follow all my projects: woodworking, mechanics, home repairs, etc. ... with an old guy who's seen a lot of DIY projects! ... 😉 → https://www.youtube.com/c/PhilippeMUR... 🔔 Activate the bell to receive my next videos 🎵 Music used: YouTube library 🔒 PLEASE NOTE: Some videos contain affiliate links. If there is a collaboration or partnership, it is indicated on the screen in a banner. ⚠️ Caution: The actions and techniques presented do not replace current standards. Use your tools conscientiously and according to your skills. 🔧 MY SECONDARY CHANNEL: Engraving, CNC, 3D printers ➡️    / @laserprintstudio   🧓 WHO AM I? My name is Philippe, I'm over 60 years old, and I've been tinkering since I was a teenager, back in the last millennium! Here, I share my tips, successes, and failures so that you too can tinker without stress.