Fairing the Inside | I'm glad this step is done!
Spread, sand, clean, and then repeat for the rest of your life! If you're looking for a video of someone sanding a boat for a week straight, well boy are you in luck! 😂 This week, I tackle the fairing of the inside of the boat using a home made gelcoat putty, along with a few other things. Follow along and hopefully pick up a few tips and tricks on the way.
▶︎
Is Patch Booster better than Duratech?
▶︎
Applying Nonskid | Pro Results - DIY Friendly
▶︎
How to FIBERGLASS over PLYWOOD! Do it the RIGHT WAY the FIRST time! Step by Step DIY fiberglassing
▶︎
Fairing the Hull of an Optimist Pram with WEST SYSTEM Epoxy
▶︎
Fiberglass Transom Build Part 2: The Peel Ply Problem Nobody Warns You About
▶︎
Time to Start Rigging | Part One
▶︎
New 33ft Center Console Has a Man Sized Hole in the Bow Complete Fiberglass Repair The Metan Way
▶︎
Rolling Alexseal paint with AMAZING results
▶︎
Installing the Coosa Transom
▶︎
How to repair Fiberglass and Gelcoat damage. PRO TIPS in FULL DETAIL!
▶︎
Spraying Gelcoat
▶︎
Make your own fiberglass parts using melamine
▶︎
Mamba Board - Go Board - PVC Board | How do they compare?
▶︎
HOW-TO CHOOSE The CORRECT FIBERGLASS FABRIC FOR YOUR PROJECT
▶︎
Applying Coppercoat - Why we said Goodbye to Anti-fouling Paint
▶︎
DIY Custom Fiberglass Leaning Post Bench Built from Melamine Mold.
▶︎
The Peel Ply Mistakes I Made So You Don't Have To
▶︎
Repairing the Stringers
▶︎
SeaCraft Potter Hull || Stringers & Bulkheads || Milwaukee 360 Laser
▶︎