Pompa submersibila de apa curata DDT 4SKM-150 - review, montaj si test de debit

Presentation, assembly and flow test for the DDT 4SKM-150 submersible clean water pump. It is a deep submersible pump, recommended for water supply for domestic, civil, gardening or irrigation use. It is suitable for pumping clean water from a well or well with a diameter greater than 100 mm. The 4SKM-150 submersible pump has an oil-bath motor with a brass rotor, copper winding and two bronze turbines. The manufacturer states that it can be used to push water from wells up to 120 m deep with a maximum flow rate of 5 m³/h at the pump level. From the tests carried out by me at a depth of 10 m (8 m + 2 m below the water level) a flow rate of 2.4 m³/h resulted. The pump can be purchased from: https://l.profitshare.ro/l/8953407 Technical characteristics: Motor power 2200 W Maximum speed (rpm) 2850 Supply voltage 220 V Insulation class IP 58 Protection class ICL B Maximum temperature 35 C Discharge connection diameter 1 inch Suction connection diameter 1 inch Maximum flow rate 5 m³/h Discharge height 120 m Dimensions: Height 54 cm Diameter 100 mm Cable length 10 m Weight 12 kg Latest videos:    / @taran.de.weekend   Disclaimer: Some links are affiliate - through them I earn a small commission if buy something (at no additional cost to you). #submersible #pump #DDT