How to "ZERO-OUT" Singer Models 401A and 500A Sewing Machines
Follow this tutorial for setting the width of the zigzag system. Formally called "setting the bight amplitude stop plates" or Zero-Out. If your zigzag width is too narrow or too wide this testing and resetting will fix that. Easy to do with just a screwdriver. Do it yourself instructions you can follow. MUSIC: Hero's Ascent by Chris Haugen How to set the zigzag width singer 401A, Singer 500A
▶︎
How to Remove and Install the Hook & Finger on a Singer 401A PART ONE.
▶︎
Setting the Cam Selector Shaft Stops on Singer Models 401A and 500A Sewing Machines
▶︎
Singer 401A Sewing Machines from the 1950s. Refreshing these Beautiful Machines - Part 1.
▶︎
Singer Automatic Zigzagger Demonstration and How-To Tutorial
▶︎
Replace / Install a Missing Tension Unit on a Singer Model 401A
▶︎
FIXED! Singer 500a Skipping and Jamming Stitch Problems
▶︎
Using a Singer 401A
▶︎
Singer 500A Rocketeer Thread Tension Unit: A curious problem solved, and thoughts about calibration
▶︎
Remove the Knobs, Lifters and Followers on the Singer 401A Slant-O-Matic
▶︎
How to fix a Locked up Singer 500A out of storage and in use
▶︎
Sewing Machine Problems: The Most Common Issues
▶︎
The Surprising Genius of Sewing Machines
▶︎
Compare Singer Models 403A & 503A Sewing Machines
▶︎
Singer 500 Rocketeer Sewing Machine
▶︎
Aus Liebe zur Feinmechanik: Der Nähmaschinendoktor aus Stallwang | Schwaben + Altbayern | BR
▶︎
How to adjust the timing on singer machines .
▶︎
Because when sewing, the bobbin holder jumps out of place
▶︎
Singer 401A Final Test and How-To
▶︎
Stitch Selection: How and Why to Use Each Stitch
▶︎