Como Enxertar Roseiras de Várias Cores no Mesmo Pé (Passo a Passo)

our friend Silvio known as Pako Pakito in the face of a lesson on how to transform your rosebush from a single color into several, enjoy this fantastic class. Did you know that there are several types of grafts of roses? However, the most used and most advised is the so-called bubble graft. It is named because it is made as follows: the gem is removed or also called a bubble to which you would like to multiply; then it must be grafted onto a horse, that is, on another rose-tree, for it is she who will make a rootstock. Here's the step-by-step guide on how to do the bubble graft! It is very important that the rootstock is at the stage where the bark appears. Which means the bark can not be too woody. In this case, it will not be possible to work the grafting of the roses. At this stage it will be very thin and therefore very sticky. To make sure the shell is ready to receive the graft, make sure it is releasing easily. If the shell is ready to receive the pink graft with the help of a very sharp knife or even a pocketknife, take a "T" scratch. It should be made as close to the ground as possible and exactly on the stem where you intend to make the graft. Then just choose a branch that has a bud of the rose, which can be used to make the reproduction. Then choose the bubble or gem that has the characteristics for the graft. Remember: the best ones are those that have the outer layer tightly closed. You have already done the "T", then you should use the knife or the knife to remove that piece of the bark that was made the letter, next to the leaf that lies the gem, near the armpit of the plant. Before proceeding with the process check behind the bark that you just removed if the firewood part has been totally removed and be careful to make this removal without ruining the yolk. Then, take the yolk to fit it into the cut made earlier. It is important that it be placed well and be located under the shell. In some cases so that the yolk is placed in the right way will need to remove excess bark from the pimple. To finish you will need to use a nylon thread or any other type of tape to wrap the graft. Do not tighten too much, the tip should be free and you will notice that the