3D Scan to Print on a Budget | BricsCAD Full Tutorial

From 3D scan to print, all on a budget with BricsCAD! In this tutorial, I’ll show you how I reverse‑engineered a quick‑release ground control point base plate for the SHARE S20 and C1 LiDAR scanner. We’ll start with a Creality Sermoon P1 3D scan, align the point cloud in CloudCompare, then rebuild the model in BricsCAD step by step. Finally, I’ll refine the geometry and export STL/STEP files ready for printing. Note from reviewer: The scanners/software was provided to me for review purposes. I was not paid to produce these videos, nor do I earn any commission from their product sales. Point cloud and STEP file for SHARE C1 & S20 GCP base plate: https://drive.google.com/drive/folder... 0:00 Ground control point base plate for SHARE C1 0:46 BricsCAD, alternative budget CAD tool for reverse engineering 1:25 BricsCAD loft model with 3D rails 1:52 BricsCAD for creating terrain elevation contour line. 2:28 3D scanning with Creality Sermoon P1 4:32 Scan alignment and clean up in Creality Scan 6:35 Point cloud alignment in CloudCompare 7:44 Reverse engineering tutorial using BricsCAD 17:56 Finish model 19:18 Export for 3D Printing, STEP vs STL 20:40 How to install quick release base plate to SHARE's LiDAR scanner BricsCAD Free 30 days trial: https://www.bricsys.com/bricscad-down... Creality Sermoon P1: https://store.creality.com/products/c... SHARE online store: https://store.share3dcam.com/ Check with your local SHARE dealer, their prices are usually lower than what’s listed on the online store. #3dscanning #reverseengineering #bricscad #3dprinting #SHARE3DCAM #creality