Installing Ocam Weather shields MN Triton

Very speedy look at the process of installing weather shields on a MN Triton. 1. Cleaned area of install with car wash liquid. 2. Used A clay bar on the area to remove any last contaminates. (Maybe not necessary but worth doing if you have a clay bar). 3. Removed anything else with isopropyl alcohol on install area. 4. Warmed mounting tape (As suggested by Ocam's video). 5. Position and stick on shield. OCAM MN WEATHER SHIELDS: https://www.ocamindustries.com.au/oca... Updates: 29/9/25 - All flairs still on. However corners of back two windows are peeling off. 14/2/26 - Driver side rear flair was so loose I took it off. Cleaned and re-taped with some outdoor tape from Bunnings. Will see how it holds.