Mechanical Pipe Connectors - No Welding

STATS Type Approved mechanical pipe connectors provide a cold-work solution, removing the associated risks of welding. Quick and efficient to install, this permanent solution significantly reduces maintenance duration and provides a cost-effective solution for piping repair, tie-in or capping of pipework. Quick and easy to install with only basic pipework preparation, STATS mechanical connectors follow a simple standard bolted installation with no specialist tools required. This results in timely completion of maintenance activities and avoids the costly hire of specialist installation or activation equipment. Sizes: 1"- 36". Pressure: 50 bar / 725 psi. Once installed the integrity of the Connector can be verified with a simple pressure test. An integrated seal verification port provides access to the annulus void between the seals allowing a leak-test to be carried out. A double block and bleed valve can be fitted to the seal verification port to provide a means of periodically monitoring the integrity of the connection, as part of a routine maintenance or inspection programme. Mechanical connectors have been fitted to a variety of piping systems with a 100% leak-free service history. Connectors are suitable for topside, terminal, FPSO or subsea installation and compatible with processed water, air systems and hydrocarbon applications. Available to suit a wide range of pipe materials including carbon steel, stainless steel, duplex and super duplex. Flanged outlet for connecting plain-end pipe to a pre-flanged termination. Coupling for connecting plain-end pipe to plain-end pipe. End Cap for capping plain-end redundant pipe work. No hot-work required, significantly reducing associated risk and costs. Quick to install resulting in timely completion of maintenance activities. Easily installed and commissioned with only basic pipework preparation. Significantly reduces maintenance costs and duration by eliminating the need for welding, associated equipment and personnel. For more information visit - http://www.statsgroup.com/