Chevy S10 Shut Down During Driving - Hot Weather Engine - Culprit= Ignition Spark Plug Wire
Yesterday, while driving in Hot Weather, the Car / Truck just died and gave us Error Code: P0341 + P0351 We changed the Ignition Coil + Ignition Control Module (ICM). It still didn't solve it :(((. So I made my own Wire, and it worked! NOTE: Hot Weather Engine Culprit= Ignition Spark Plug Wire. The Wire that goes from the Ignition Coil to the Distributor Cap In this case, it was the Ignition Coil Spark Plug Wire!
▶︎
chevy s10 gmc sonoma 4.3L cranking no start
▶︎
How to Remove Ignition Coil & ICM (‘98-‘04 S10 4.3L)
▶︎
If Truck Randomly Shuts Off THIS MIGHT BE WHY!!
▶︎
GMC Ignition Coil & Ignition Control Module (ICM) - Re-Thermal + Cleaning - Car / Truck S10 Chevy
▶︎
Chevy Tbi old school distributor no fire no fuel diagnosis and fix
▶︎
Bad Ignition Coil or Spark Plug? Don't Replace/Fix the Wrong Part |ignition coils and spark plugs
▶︎
1998 S10 2.2l injector issues
▶︎
4.3 L Chevy low idle stalls after warmed up Fix
▶︎
How to Replace Ignition Control Module 1988-1999 GMC K1500 5.7L V8
▶︎
🔋Never Buy Drill Batteries Again! Use Old Tire Valves and Watch What Happens! 😱
▶︎
VACUUM LINES | VACUUM HOSE CONNECTION | CHEVROLET S10 | CANISTER VALVE | CHEVY S10
▶︎
Chevy S10 2.2 new ignition control module
▶︎
Chevy Blazer 4.3 Misfire- Fixed!
▶︎
Chevy S10 Coil Pack Replacement Installation - Misfire Solution
▶︎
7 Signs of Bad Spark Plugs
▶︎
4.3 Chevy S10 Not starting. Fixed!! EASY...Popping, Vapor locking...Jump time??... 1995-2008
▶︎
1988-95 GM Truck Ignition Systems
▶︎
No Start / No Spark / Cranks OK - GMC Jimmy / S10 Blazer
▶︎
03 Chevy S10 misfire and no power.
▶︎