Montage von Rollschubführungen, Hettich für Heimwerker

Roller drawer runners are installed in two steps. The angled component of the roller drawer runner is mounted on the underside of the drawer, flush with the front panel. Then, the screw positions for the cabinet rail are marked on the inside of the cabinet. The exact positions depend on the drawer lengths and heights and can be found in the runner assembly instructions. The screw position of the foremost screw is always 37 mm behind the front edge of the cabinet, and all other screw positions are on a horizontal line. This ensures a distance of 2 mm from the front edge of the cabinet when installing the roller drawer runner. This applies to all roller drawer runners, regardless of drawer length. Once both parts of the runner are screwed in place, the drawer is pushed into the cabinet. A roll-out protection prevents the drawer from being pulled out of the cabinet during daily use. Further information: http://www.hettich.com