Fitting Tongue and Groove Panelling to the walls of our DIY narrowboat project. Boating On A Budget.

As the project progresses it's time to start making the bedroom look like a room! First part of that process is panelling out the upper walls, we are using tongue and groove matchboard panels. Not a difficult product to install, but non the less it takes time - and there's a few tips along the way... If you haven't seen our previous videos, or heard about us, here's a brief background on or Boating On A Budget project... In August 2019 we bought narrowboat - a 1980s Springer that's 36ft long and had previously been sunk twice prior to us purchasing it! It's engine was rather poorly so we took it out and fitted a DIY self build Electric Drive system - which we recorded and made vlogs about (available to view on YouTube). Move forward a year from buying that boat and we were loving life on the water so much we wanted a bigger boat so we could move aboard full time. So we bought 'Lyanda Lady' a 50ft boat that needed a LOT of work. This series is following us stripping the boat right back to a basic shell. It will then be time to completely re build the boat before moving aboard. Just to add to the fun I'm a Tight Yorkshireman, and we are working with a small budget - hence Boating On A Budget! Come along and join us on what promises to be a epic adventure! If you like what you see be sure to click the 'thumbs up' icon on the video. Subscribe to the channel (for free!) and click the 'bell' icon - then you will receive notifications each time we upload a video - and each video means we've made more progress. Follow us on Twitter... https://twitter.com/PeteBel10174813?s=09 Join us on facebook...   / wingingitboatingonabudget   If you want to help support our channel (so we can buy better filming equipment) please consider joining us on Patreon...   / wingingit2020   or by donating via paypal... [email protected] #WingingIt! #TheTightYorkshireman #BoatingOnABudget