Método de #Torneado #Cónico💥 inclinando el carro superior en #Torno papralelo 💓👌#tech #tecnología🚀🔌

Conical Turning Method by tilting the upper carriage in Papralelo lathe. 🔔SUBCRIBE NOW! 👍 https://n9.cl/zr56 💖DONATE 👩‍👩‍👦😀 If you want to support the channel to continue creating quality and free content for all our followers. ✅https: //www.paypal.com/biz/fund? Id = G6WJA95UCVHBG 👇🔽🔻⏬🔔🔶 🔷 🔸 🔹 🔺👇 In workshops, the cones are usually called cone trunks. In the process of carving the cone on the lathe there are three possibilities: 1. Turning the top carriage or #charriot. It is used for short cones with a conical angle between 0º and 180º. Preparatory work. The tool carriage must be rotated at an angle equal to half the angle of the cone indicated in the drawing or also calculated based on the given values. Turning. Turning the crank by hand gives the tool advance. Irregular turning of the crank can result in a rough or wavy surface, therefore if necessary, the crank should be held with both hands, one on top of the other. The maximum length of the cone is equal to the maximum stroke of the carriage. 2.Using a conical turning device. This procedure is indicated for long cones with a conical angle of up to 20º. If you are a student, a teacher or just a curious person who wants to learn, we will explore the world and the one that why things happen and we will try to continue learning more from all our collaborators. 🙏Thank you for watching our videos.👨‍👨‍👧‍👧 👩‍👩‍👦😎😍 ❤️ ⚠️ ⚡ 🚀 👉Subscribe to the channel✅🤣    / @reynermairena1   👉Follow us: ✅🤣 Facebook FanPage:   / aprendamosjuntosenlaescuelita   👉Twitter✅🤣   / mairenareyner   👉Linkedin✅🤣   / reyner-mairena-57aa44190   👉Instagram✅🤣   / mairenareyner   👉VK✅🤣 https://vk.com/id559256279 👉Tumblr✅🤣 https://www.tumblr.com/blog/mairenare... ❤️ ⚠️ ⚡ 🚀 👌 #technology #tech #tech 👌 #Maintenance #Industrial 👌 # Reyner🎦👌