How to rebuild the front suspension on your 2007-2013 Tahoe or Silverado!

This is how to complete a front suspension rebuild for any GMT900 1500 series 2wd vehicle. The only components we did not replace were hubs and inner tie rods. Parts used listed below along with all vehicles this applies to. Like/subscribe and check out other projects on our channel! Thanks! -------------------------------------------- Vehicles this video applies to: 2007-2014 Tahoe, Suburban, Yukon, Yukon XL 1500 series 2wd 2007-2013 Silverado and Sierra 1500 2wd The same principals apply for 4wd, but this video does not show axle shaft removal/replacement. -------------------------------------------- Parts used in this video: Driver Side Upper Control Arm: https://a.co/d/10MO2vh Passenger Side Upper Control Arm: https://a.co/d/6UMAPrX Lower Ball Joints (need 2): https://a.co/d/7gp5zFy If you prefer to purchase the entire lower control arm, these are good options: https://a.co/d/cb6qk5j https://a.co/d/7otT23x Tie Rods (need 2): https://a.co/d/2LxeTsx Struts (need 2): https://a.co/d/27godiy Pads/Rotors: https://a.co/d/4nBtvzR Sway Bar Bushings: https://a.co/d/aF31daK Parts we didn't replace, but might be needed: Inner Tie Rods (need 2): https://a.co/d/fThUaki Hubs (need 2): https://a.co/d/4kAm3X4 -------------------------------------------- Skip to the section you need: 00:00 Intro 00:37 Tool List 00:51 Applicable Vehicles 02:05 Brake System Removal 07:06 Sway Bar End Link Removal 07:28 Tie Rod and Ball Joint Separation 09:27 Knuckle/Spindle Removal 10:47 Strut Removal 11:51 Upper Control Arm Removal 13:29 Tie Rod End Replacement 15:50 Lower Control Arm Removal 17:04 Lower Ball Joint Replacement 19:39 Lower Control Arm Install 20:47 Upper Control Arm Install 22:36 Strut Install 24:01 Knuckle/Spindle Install 26:37 Brake System Install 31:23 Sway Bar End Link Install 33:05 Last Things to Check 34:04 Outro - Thanks for Watching! -------------------------------------------- Check out some of our other videos! Shop Day Fixing Our Firebird's Brakes:    • SHOP DAY - Fixing 1967 Firebird Brakes and...   How we built a $300 1968 Mustang to race Duct Tape Drags!    • How we built a $300 1968 Mustang to race D...   -------------------------------------------- 👉 Want to follow us on Instagram? Click here:   / burlybuilds   #burlybuilds #gmt900 #suspension #suspensionrepair #tahoe #silverado #sierra #suburban #escalade #yukon #yukonxl #brakes #balljoint #mechanic #shocks #diy