Гидроизоляция электросамоката на примере iBalance Athlete

Waterproofing of an electric scooter. Work performed: 1. Shrinking all connectors and connections inside the deck with heat shrink and applying sealant on both sides to prevent moisture from getting inside. 2. Applying Urethane 71 varnish to the controller boards on both sides. Applying sealant to the holes where the wires enter the controller body. 3. Inspecting the battery of the electric scooter, if necessary, applying sealant to the places where the power wires exit. 4. Carefully inspecting the deck for holes, if any are found, applying sealant. Sealing the connectors of the charging socket, bulbs, LED strips, etc. 5. Applying sealant around the perimeter of the deck, as well as where the power wires enter and exit. 6. Applying Urethane 71 varnish to the stator and magnets of the motor wheel. 7. Applying sealant to the place where the power cable enters the motor wheel. 8. Apply sealant to the back of the trip computer. 9. Apply sealant to the wire entry points into the headlight, taillight, brake light, horn, etc. 10. Additional work may be required depending on the model of the electric scooter. Still wondering where to waterproof your electric scooter? Of course, at https://luxwheel.ru/!!! Because we: Do all the work efficiently, provide a guarantee for the work performed, and do not overcharge. Our website: luxwheel.ru Our phone number: 8-985-226-56-20 Our address: Moscow, Solovyiny proezd, 18A Call, sign up for repairs, waterproofing or tuning, we will be glad to see you as our guests!!! https://luxwheel.ru/ bye everyone!