Enthärtungsanlage tauschen leicht gemacht – das Alfiltra Austauschset in der Praxis 💧

In this video, we follow the replacement of an existing water softener with the Alfiltra replacement kit – live on-site at a customer's home who was dissatisfied with her old system. Together with Tom and Stefan, you'll see the entire process: from disconnecting the old system and dismantling it without pressure to setting up the new one. Stefan, an experienced Alfiltra technician, explains step by step what's important – from the correct wastewater connection and hose lengths to adjusting the water hardness. He shares many honest, practical tips straight from his everyday work. The most important tip beforehand: Send us photos of your connection block, the wastewater situation, and the desired location – this will help you avoid hoses that are too short and unnecessary reorders. ⏱ Chapters 00:00 Intro – The Replacement Kit Introduced 00:19 Why Use a Funnel Instead of a Lifting Station? 00:40 Disconnect the old system and switch to bypass 01:06 Depressurize the system (forced regeneration) 02:11 Disconnect the power – safety first 02:39 Disconnect the old hoses and dismantle the old system 04:24 Kinks in the wastewater hose – the typical weak point 04:50 Properly route the wastewater: funnel with an air gap 05:21 Determine the location and select appropriate hose lengths 06:30 Position the new system (access to the water meter) 06:59 Weight and salt quantity 07:25 Connect the inlet of the new system 08:50 Service life: 20–25 years of ion exchange resin 10:39 Connect the wastewater 11:13 What is the maximum pumping height for the wastewater? 11:44 The right wastewater hose (anti-limescale, kink-resistant) 13:17 Air gap at the funnel – protection against bacterial growth 14:06 Backflow preventer – why it's important 15:19 Connecting the power & finalizing the system 15:43 Connection fittings & suitable adapters 16:29 Which photos should you send in advance? 17:23 Dirt filter & backwashing 18:47 Measuring inlet water hardness 19:51 Setting the water hardness at the valve (BNT) 20:31 Measuring the outlet hardness & adjusting the blending ratio 21:48 Refilling the salt – the final step 22:55 Conclusion & farewell ▬ About this channel ▬▬▬▬▬▬▬▬▬▬▬▬ Alfiltra – Your expert for water softening systems and water treatment for private households and businesses. ▬ Contact us ▬▬▬▬▬▬▬▬▬▬▬▬ 📞 +49 (0) 7251 936 76 0 | 📧 [email protected] #Alfiltra #ReplacementSet #WaterSoftener #WaterSoftening #WaterTreatment #Installation #Assembly #PracticalKnowledge #Craftsmanship #SoftWater