Cara reset injeksi manual PGM-FI Honda & setting altitude

How to reset Honda's PGM-FI manual injection. How to set the Altitude on a Honda motorcycle Here, I'll share the meaning of the Honda PGM-FI MIL flashing codes. 1: MAP (Manifold Absolute Pressure) Manifold vacuum pressure 7: EOT (Engine Oil Temperature) Engine oil temperature ECT (Engine Coolant Temperature) Engine radiator coolant temperature 8: TP (Throttle Position) Throttle position/throttle opening 9: IAT (Intake Air Temperature) Intake air temperature 11: Speed sensor 12: Injector 21: O2 (Oxygen) sensor 29: Idle Air Control Valve (IACV) 33: ECM (Engine Control Module) 52: Crankshaft Position (CKP) 54: Bank Angle sensor These are the injection sensors whose damage/malfunction can be detected by the MIL. Some injection parts, such as the fuel pump (pressure), will not be detected, requiring special testing. The altitude setting aims to adjust the engine to the ambient oxygen levels based on the area's altitude above sea level. Mode 1: 0 - 2,000 m/sl Mode 2: 2,000 - 2,500 m/sl Mode 3: 2,500 - 3,000 m/sl Mode 4: 3,000 m/sl and above Altitude setting is also necessary after replacing injection system parts such as injectors, fuel pumps, TPS sensors, CKP sensors, etc. Hope this is helpful. Don't forget to SUBSCRIBE to my videos. It's FREE!!! Thank you. Address: PRATIWI MOTOR Workshop Jl. Raya Kuwu - Sragen Km. 08, Rejosari Village, Kradenan District, Sragen Regency Grobogan, Central Java Phone/WhatsApp: 082220249095 #kakexchanel #motorcycletutorial #resetinjeksi