How to Sew a PIONEER BONNET free pattern, full tutorial, style & size options, costume, historical

Visit the website linked below for the free pattern. https://learncreatesew.com/free-patte... Supplies: The supplies listed are for the largest-sized bonnet. Smaller sizes will require less fabric. 3/4 yard Cotton Fabric 10 inches of 1/4-inch wide Elastic 2/3 yard Medium weight fusible interfacing Coordinating Thread Optional brim Stabilizers: Stabilizer is not required but is recommended, especially for extended or ruffled brims. Stabilizers could include Duck Canvas or heavy-weight fabric, Fusible Web, Medium-weight fusible interfacing, and/or sew-through buckram. The quantity needed will vary based on the width of the fabric. 2/3 yards or less of each should be plenty. Use the stabilizer pattern as a guide. Stabilizers are used in addition to the interfacing listed above. My favorite stabilizer combination is 1 layer Duck Canvas, 1 layer Fusible Web (I used Heat n Bond Lite), and 1 layer Medium Weight Fusible Interfacing (I used Pellon's SF101) 00:00 Intro & Style Options 02:00 Supplies 04:44 Getting Started & Cutting Out 08:08 Applying the Interfacing & Stabilizer 14:42 Prepping the Brim Ruffle (Optional) 16:16 Making the Straps 19:58 Preparing the Simple Crown without Neck Ruffle 22:58 Preparing the Crown WITH a Neck Ruffle 31:03 Constructing the Brim 35:12 Adding a Brim Ruffle (Optional) 44:20 Inserting the Elastic 47:14 Pinning the Crown to the Brim 50:37 Pinning the Crown to the Brim (Simple Neck Finish View) 51:44 Attaching the Brim to the Crown - Gathering & Sewing 54:24 Adding the Ties 58:53 Finishing & Hiding the Seam Allowance Song "Way Out West" by Chris Haugen from the YouTube Audio Library