How to replace the Serpentine belt 2009-2014 Ford F150 🛻

Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150 Our video shows you how to change the Serpentine belt on your 09-14 Ford F150. You will be asked to remove the tensioner pulley, remove the serpentine blet, finalise the reassembly and other steps you'll need to follow in the correct order. Take your ratchet and your 13 mm socket and let's get started! ⚙️ NEEDED CARPARTS AND PRODUCTS Serpentine belt set : https://carparts.solutions/Serpentine... 💪 TIGHTENING TORQUES Idler pulley holding screws : 18 Ft-lbs Serpentine belt tensioner holding screws : 18 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Ford F-150 : https://carparts.solutions/ToolBox List of the tools we used to replace the serpentine belt on a Ford F-150 : 8mm wrench Breaker bar 1/2" Drive extension socket Ratchet 13mm socket 10mm socket Torque wrench : https://carparts.solutions/TorqueWren... Don't forget to subscribe :    / @carpartscomofficial   🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : 2009 Ford F150 2010 Ford F150 2011 Ford F150 2012 Ford F150 2013 Ford F150 2014 Ford F150 📽 🛠 USEFUL VIDEOS 🛠 📽 How to replace the Battery 09-14 Ford F150 ⚡:    • How to replace the Battery 2009-2014 Ford ...   ⚠️ CARPARTS.COM'S INFOS The serpentine belt moves the alternator which charges the battery. Yet, it also operates the power steering, the air conditioning compressor and sometimes the water pump. For safety reasons, we advise you to disconnect the battery. Before proceeding with the replacement of the serpentine belt, we recommend taking a picture or to draw the path of the belt around the different pulleys, in order to position it correctly later. Before starting your car again, check that the belt is properly positioned in all the pulleys. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:11 Disconnect the battery 0:38 Tips before changing the serpentine belt 0:47 Remove the serpentine belt 1:18 Remove the tensioner and pulleys 2:53 Put the tensioner and pulleys back 4:03 Put the belt back 4:41 Reconnect the battery