Strain Gage Applications with M-Bond AE-10 up to 400 deg F (204 deg C).

Through extensive testing, the M-Bond AE-10 is now been qualified for use up to 400 deg F (204 deg C). Because a strain gage performs no better than the adhesive with which it is bonded to the test specimen, the adhesive is a vitally important component in every strain gage sensor installation. Although there is no single adhesive, which is ideally suited to all products, there is a wide selection of authentic and dedicated adhesives for strain gage sensors that cover the spectrum of stress analysis, force measurement testing, and for use in transducers manufacturing. Micro-Measurements CEA-Series strain gages (sometimes spelled gauge) are the most widely accepted for use in general-purpose experimental stress analysis applications in the world today. These polyimide encapsulated constantan gages feature large, rugged copper-coated tabs. This construction provides optimum capability for attaching leadwires directly to the tabs, eliminating the need for separate terminals. Micro-Measurements Certified M-Bond AE-10 is an excellent adhesive. For proper results, the procedures and techniques presented here should be used with qualified Micro-Measurements installation accessory products. Adhesives: https://micro-measurements.com/pca/ac... Micro-Measurements: https://micro-measurements.com/ Advanced Sensors Technology: https://micro-measurements.com/advanc... StrainTalks™ seminar: https://straintalks.com/ StrainBond™? https://micro-measurements.com/bonding StrainBlog: https://www.strainblog.com/