TOSEVEN DM02 installation and first test ride! CYC Photon Removal and discussion.

This video looks first at the removal of the CYC Photon mid drive and its replacement with the new DM02 from TOSEVEN motor. Ran into a potential issue with one of the bearings on the CYC Photon. Overall the install for the DM02 was pretty straightforward. There are a few issues that could use work including cable lengths and crank offset. The test ride was cut very short due to a firmware bug which I will need a programming cable to resolve. More to come when its back on the road. Timestamps 0:00 - Introduction 0:41 - Uneven rotation on Photon cranks 1:22 - ROGOV battery bag 1:55 - Left crank arm loose 2:38 - Bottom bracket not smooth 3:14 - Looks like a bearing issue 3:42 - The bearing is not moving well 4:33 - Overall its in good shape 5:22 - DM02 and Photon Side by side 5:49 - DMO2 vs Photon motor positioning 6:15 - DMO2 Motor Positioning 7:58 - Speed sensor wiring 8:37 - Chain Ring and cranks 9:04 - Chain line 10:16 - Chainring lockring 10:44 - Crankarm spacing 11:43 - Speed sensor configuration 12:31 - The wires are too long 13:29 - Here she is 14:08 - Test Ride 16:30 - Work to be done 18:01 - Thanks for watching If you want to get involved in discussion about these motors you can do so on the High Voltage discord community.   / discord   The High Voltage upgrade kit for the BBSHD can be found at https://highvoltagekits.com/hv-shop/p... please make contact to order via the form on bottom of the page. Join this channel to help support the work we do and help us make more light electric vehicle content! Get a few perks, including a unique supporter badge on Discord and YT, behind the scenes and advance video clips and a say in the direction of the channel.    / @highvoltagekits