Штукатурка по ИСПОРЧЕННОМУ пенопласту: Работает и по новому пенопласту.

Many people think that if the foam on a façade has faded in the sun and started to crumble, it just needs to be replaced. In this video, I'll prove otherwise! I'll show you how I restored the damaged coating to like-new condition and created a durable plaster finish using regular tile adhesive. 00:00-Six-month results: How's the façade holding up? 01:10-About the strength of the corners and plans for decorative brick 02:10-Why this method is more cost-effective and faster 02:39-Problem: The foam has faded and is crumbling. What should I do? 03:01-The Secret of Adhesion: Preparing a "Worn Out" Surface 03:22-Primer: Restoring a Facade to Like-New Condition 03:42-Additional Insulation and Installing Moldboard 04:25-Window Sill Life Hack (Vibration Insulation) 04:44-What Adhesive Did I Use and How Much Does It Cost 05:11-The Plastering Process 06:01-Reinforcement with Facade Mesh 06:20-Pull Test: How Strong Does the Adhesive Hold? 07:11-Conclusion and Conclusions What you'll learn from the video: How to properly prepare loose and yellowed foam to prevent the plaster from falling off. Why I chose tile adhesive instead of a special façade mixture and how much I saved. Step-by-step process: from dust removal and priming to reinforcing with mesh. The result after six months: have cracks appeared and how is the adhesive holding up on the foam? A useful life hack for window sills and car sound insulation. This method is a real lifesaver for those whose construction has been delayed and whose budget is limited. I did the entire process myself, and I'm completely satisfied with the result! Like the video if you found it helpful, and subscribe to the "Ural Guy" channel—here I share my honest experience of building my own garden house on a budget. #facadeplaster #DIY #houseinsulation #foam #tileadhesive #budgetrepair #UralGuy #construction