BMW R1250GSA SBSのブレーキパッドに交換してみたら　まさかの純正よりよくなった感じ! 自分で整備、ファイナルギアオイル、リアブレーキパッド交換

◎It is very dangerous to handle the brakes◎ Only those who have the correct knowledge and skills should perform the work. R1250GSA 2nd self-maintenance I changed the final gear oil and replaced the rear brake pads. It's a much cheaper pad than the genuine one, so I didn't have high expectations, but it was surprisingly good. I carefully cleaned and greased the brake calipers. ☆2023.0831　I got the service manual for R1250GS Adventure☆ ●Rear brake caliper tightening torque Confirmed that 2 M8x30 28Nm ●Final gear oil I bought a higher grade oil with the intention of replacing the transmission oil, but it wasn't necessary so I used that oil for the final gear. I am using a different oil, but the original specification is Gear oil (Hypoid Axle Oil G3) ●Filler plug tightening torque M12x1.5 25Nm (The video says 20, but this is a correction) ●Drain plug is M12x1 20Nm ●Please note that we have taken care to ensure that there are no mistakes as much as possible. HARU Channel will not be held responsible for any problems caused by this video, so please be aware of this before using it as a reference.