Встановити OpenIPC на IP камеру SigmaStar SSC30KQ

As a meme on the screensaver - Milla Jovovich answers fans in the chat, January 1995. https://www.millaj.com/model/mag952.s... English video from which I took the instructions:    • OpenIPC digital FPV - Installation on SSC3...   Connection type: Serial Baud rate: 115200 UART voltage: 3.3V A common ground is needed, so you need to connect Rx, Tx and Ground to the camera. Firmware commands (for the case if the camera has the address .200, and the laptop has .222): setenv ipaddr 192.168.144.200; setenv serverip 192.168.144.222 Disable the firewall in windows Save the factory firmware image sfbin 21000000 0 backup-factory-ssc30kq-nor16m.bin Download the image from TFTP: tftpboot 0x21000000 backup-ru-ssc30kq-nor16m.bin Clear the flash memory and write the image to the camera's flash memory: sf erase 0x0 0x1000000; sf write 0x21000000 0x0 0x1000000 reset Support the Magyar collection for the People's Fiber Optic:    • Очі та Жало вйо-day 26.02.25, 414 ОБрУБАС ...   ---------------------------------------------------------------------------------------------------------------------------- Playlist on Russian fiber optic drones:    • Російський дрон на оптоволокні: що здивува...   Documentation, lists for purchases to collect Ukrainian: https://drive.google.com/drive/folder...