How to Replace Window Regulator 08-12 Jeep Liberty

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-16-cg Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 2008-12 Jeep Liberty. • Check here for more videos on the 2008-12 Jeep Liberty:    • Jeep Liberty 2008-2012 2nd Gen   This repair was done on a 2010 Jeep Liberty Limited 3.7L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles: 2008 Jeep Liberty 2009 Jeep Liberty 2010 Jeep Liberty 2011 Jeep Liberty 2012 Jeep Liberty Tools you will need: • Phillips Head Screwdriver • Pocket Screwdriver • 10mm Socket • 8mm Socket • Trim Tool Set https://1aau.to/odK/1AXXX00006 • Complete Torx Bit Set • T27 Torx Driver • Ratchet • Drill • Painter's Tape • Magnet - Extendable Subscribe:    / @trq   Check out our playlist: Jeep Liberty 2008-2012 2nd Gen:    • Jeep Liberty 2008-2012 2nd Gen   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.