Indesit 60cm Chimney Cooker Hood | New Build Install

In this video, I install an Indesit 60cm Chimney Cooker Hood in Silver in a UK new-build property. I am working in the trade and this video shows how I install chimney cooker hoods on site. This may also be useful for DIY viewers, but I do not recommend copying these steps. Domestic appliances should always be installed by a fully trained and certified person, in line with current regulations. This install uses a recirculation setup, including a charcoal filter and chimney diverter that redirects air through the side vents in the chimney section. Important note: For recirculation to work correctly, the hood must be designed for it and airflow must be managed properly. If this is not possible, the cooker hood must be ducted directly outside. In this installation, everything went as expected with no issues. 🧰 Installation details covered: 1) Wall mounting and height positioning 2) Chimney section fitting and alignment 3) Recirculation kit setup 4) Charcoal filter and diverter placement (Filters already pre-installed) 5) Final fit and functional checks 🏠 Property type Installed in a UK new-build home. These cooker hoods are commonly fitted on sites such as: St. Modwen Keepmoat Vistry And similar developers ⚡ Electrical connection This model can be hardwired, but in this case it was connected using a fused plug. ⚠️ Common mistake to avoid Cutting the chimney section at the wrong height, which blocks the recirculation vents and stops the hood from functioning correctly. Always measure carefully before cutting. 👍 Like my content? Check out the channel for more appliance installs including: Dishwashers Fridge freezers Washing machines All integrated and built-in appliances commonly found in UK new-build homes. 🔖 Hashtags #Indesit #CookerHoodInstallation #ChimneyHood #KitchenInstallation #ApplianceInstaller #UKNewBuild #IntegratedAppliances #TAF