【100v溶接機】MIGノンガス半自動溶接！初めてのビードの引き方・練習方法 初心者向け よくある失敗トップ5 ミグ溶接

[ASAHI Welding Machine Specialist] https://yousetsuki.com/ Welding machine used in this video: 【MIG140】 https://yousetsuki.com/product/weldin... "What should I practice first when learning MIG welding?" The answer is simple: Start with just a "straight bead." Once you can consistently do this, you'll be able to do almost any DIY metalwork. This video summarizes the four things beginners often stumble over: "Settings, distance, angle, and speed" in a way that you can easily follow. 【Today's Points】 ✅ Practice material: 2-3mm thick steel plate ✅ Wire: 0.8mm recommended ✅ Torch distance: Constant (approximately 10-15mm) ✅ Angle: 10-15 degrees ✅ Speed: Constant ✅ Setting is OK when the sound is a consistent "zzzzzz" 【Bead Self-Checklist】 □ Is the width consistent? □ Is it too thick? □ Are both ends melted? □ Is there too much spatter? □ Can you reproduce the same results? Improvement isn't about getting it right by chance, but about getting the same results every time. ───────────────────────── [For Beginners: Welding Machine + Necessary Accessories Complete Set Here] 👉 https://yousetsuki.com/product/weldin... Having a welding machine, mask, gloves, tips, and wire will dramatically increase your improvement speed. 📩 Please tell us which base material you want to weld! We will tell you the recommended settings according to the thickness. ① 1-2mm ② 2-3mm ③ 3-6mm ④ Thicker than that 📞 0120-501-679 (Weekdays 10am-5pm, Toll-Free) 🌐 https://yousetsuki.com/ We also accept inquiries via LINE. LINE: https://line.me/R/ti/p/@170prziv ───────────────────────── #MIGwelding #BeadPractice #WeldingBeginner #SemiAutomaticWelding #100VWeldingMachine #100Volts #WeldingPractice #DIYWelding #MetalworkingDIY #WeldingTips #NonGasWelding #WeldingImprovement