2010-2015 Toyota Prius Intake Manifold cleaning

This was for a 2012 Toyota Prius. You want to do this service every 100-120k miles due to oil and sludge getting trap in the intake manifold, and also preventative maintenance on the PCV valve. Its best to do this service so you can kill 2 birds with 1 stone. Enjoy! P.S: Also make sure to clean the small ports on the intake manifold like everyone mentioned in the comment section. Also, people have been soaking the egr cooler in oven cleaner and it broke down all the carbon build up in there. Tools: https://amzn.to/4gxGF43 3/8 Ratchet or https://amzn.to/4gUlHN2 1/4 Ratchet http://amzn.to/2aJy9kF 3/8 short extension set http://amzn.to/2aYXnIy 3/8 10mm deep socket http://amzn.to/2aZPqGv 10mm wrench http://amzn.to/2aCThW4 3/8 12mm socket http://amzn.to/2axt8Zh 1/4 1,3,6" extension set http://amzn.to/2btKbQd 1/4 10mm deep socket http://amzn.to/2aweq4t Pliers http://amzn.to/2b5u8I2 Hose clamp tool http://amzn.to/2aETaN5 Hook and Pick Set (to get those plastic clips) Drills Brushes, plastic and brass Parts: http://amzn.to/2b5169E Brake clean Intake manifold gasket Torque specs: 21 ft. lbs - Intake Manifold bolts and nuts 62 in. lbs - MAP sensor 7 ft. lbs - EGR pipe bolts 15 ft. lbs - Oil dipstick guide sub-assembly bolts 7 ft. lbs - Throttle body bolts Hand tight like and share this video! If you have any questions or concerns, feel free to leave comments on our FB page. Like us on Facebook http://bit.ly/nutzaboutbolts1 and SUBSCRIBE! http://bit.ly/NutzAboutBolts2