BENGALA INTELIGENTE COM ARDUINO (Parte 1): Montagem do Circuito Passo a Passo

Hey everyone! Welcome back to the channel! In the previous video, we explored the script for our Smart Cane. Now, it's time to get our hands dirty and assemble the hardware! In this practical and visual tutorial, I'll show you step-by-step how to connect each component to your Arduino board. Let's build the circuit from scratch together and see it working in practice! In this video, you will learn how to connect: ✅ The HC-SR04 Ultrasonic Sensor (VCC, Trig, Echo, and GND pins). ✅ The buzzer for sound alerts. ✅ The correct power supply for the entire circuit on the breadboard. ✅ The complete wiring diagram to avoid any errors! At the end, we'll do a complete test to ensure all connections are perfect before uploading the code. ➡️ CANE SCRIPT (SOFTWARE) VIDEO: If you haven't seen it yet, check out the video where I explain the entire project code:    • BENGALA INTELIGENTE COM ARDUINO (Parte 2):...   👇 Components Used in Assembly: Arduino board (Uno, Nano, etc.) HC-SR04 Ultrasonic Sensor 5V Active Buzzer Breadboard (Protoboard) Jumper wires (male-male / male-female) Did you like the step-by-step instructions? Then don't forget to LIKE 👍, SUBSCRIBE to the channel and ACTIVATE THE BELL so you don't miss the next projects! Leave your questions in the comments below! #Arduino #Circuit Assembly #Hardware #Smart Walking Stick #Ultrasonic Sensor #Buzzer #DIYElectronics #ArduinoProjects #HardwareTutorial #Protoboard