Fortin Evo T Harness All in One Remote Start programming and set up

I go over feature programming and basics of using the fortin flashlink-2 with an evo-fort1. Get one today at www.lesscosales.com Overview Universal All-In-One Data Bypass and Interface Module. The EVO-ALL is an ALL-IN-ONE data immobilizer bypass and doorlock interface combo module. It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle. Product Features •3x on-board LEDs for simplified programming and diagnostics. •1x preloaded firmware for maximum compatibility. [1] •4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.[2] •20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems. •Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly. Communication Ports •3x CAN-Bus controllers. •3x General purpose controllers (J1850, Class 2, encrypted key etc.). •2x On-board Relays (SPDT). •1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX). •1x TB control port for TB-series modules. [3] Parts Included •1x EVO-ALL control module (firmware preloaded). [4] •1x 44-page Installation and programming guide. [4] •1x 20-pin General purpose harness [5]. •1x 4-pin Fortin 2-way data-link harness. [2] •1x 5-pin CAN-Bus harness. •1x 6-pin Relay harness. [5]