Технология приклейки минеральной ваты на клей пену, оконные откосы и утепление фасадов минватой

8-903-743-27-96 8-903-724-77-28 n-dom.ru ceresit.msk.ru baumit.msk.ru Technology for insulating facades with mineral wool, technology for gluing mineral wool to the facades of houses where window units are not installed flush with the plane of the exterior walls, but with a slight recess. You will see how to remove excess foam, windproof films, or STIZ, treat window frames with an alcohol-based degreaser, mark and glue junction elements with 9mm mesh to the window frames. After the preparatory steps, strips and blocks are cut from the facade mineral wool slab, these blocks are dry-cut to the required dimensions, and glued to the window slopes with Ceresit CT84 adhesive foam. The foam adhesive sets very quickly, and after two to three hours, you can begin finishing the glued strips and beams. At the top of the corners of window and door openings, GE blocks cut from the main mineral wool sheets are glued using cement adhesive or foam adhesive. The GE blocks and other sheets are glued so that they overlap the mineral wool beams glued to the window slopes. To adjust and level the facade surfaces, we use hanging cords, a three-meter straightedge, and a level. I think this video will be of interest to those who want to learn how to insulate facades with mineral wool using the SFTK Wet Facade technology or to those who want to check the quality of the work being done on their home.