ONKYO AV Receiver - How to Repair "HDMI Board Error" Part#2

VIDEO TUTORIAL for an ONKYO AV Receiver to easily fix the "HDMI Board Error": connected devices on the HDMI board are no longer reliably recognized. Using DEBUG MODE for error analysis. With the REFLOW method, the pins of the HDMI Transmitter IC are re-soldered. After the repair, the ONKYO AV Receiver works properly again and connected devices on the HDMI Board are detected. The instructions of the Video Tutorial are similarly applicable for devices of the ONKYO TX-NR535, TX-NR636, TX-NR737, TX-NR838, DTR-30.6, DTR-40.6, DTR-50.6, HT-R593, HT-R693, HTR-993, HT-RC-660. The Video should be of interest to all those who have an ONKYO AV Receiver with the “HDMI Board Error” problem and want to fix it. My aim with this video is to show how simple repairs can extend the life of great devices and electronic waste in the long term can be avoided. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬ TABLE OF CONTENTS ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ 00:00 Intro 01:57 Error Analysis with DEBUG MODE 04:25 Troubleshooting in the ONKYO AV Receiver 05:31 REFLOW Method with Heat Gun 07:25 Functional Test of the ONKYO AV Receiver 08:02 Personal Evaluation 10:37 End ▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PRODUCT LINKS ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ DEWALT D26414 Heatgun 2.000 Watt (50 - 600°C) with Point Nozzle (https://amzn.to/34M9yGS) ▬▬▬▬▬▬▬▬▬▬▬▬▬▬ OTHER LINKS ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ONKYO AV Receiver TX-NR737 Service Manual (https://elektrotanya.com/onkyo_tx-nr7...) #repairandupgrade #onkyo #hdmiboarderror