Montaż, podłączenie i uruchamianie rekuperatora Blast 630. Przejścia przez ścianę, anemostaty.

In this video, I'll show you how I made wall penetrations for the air intake and exhaust vents. I'll mount the Blast 630 heat recovery unit on the wall and connect it to the previously installed system. I'll install the supply and exhaust diffusers in the suspended ceiling. Finally, I'll start up the unit and give a short demonstration of its functions. Chapters: 0:00 Introduction 0:19 Drilling holes for the air intake and exhaust vents. 2:02 Mounting the heat recovery unit on the wall. 2:43 Connecting the heat recovery unit to the system using flexible ducting. 3:24 Cutting flexible ducting with insulation. 4:40 Suspending the flexible duct from the ceiling. 5:27 Installing the supply and exhaust diffusers in the plasterboard. 6:23 Preparing the system for initial start-up. 6:39 Inspection of the Blast 630 heat recovery unit. 7:16 First start-up of the mechanical ventilation. 8:03 Overview of the device's options in the control panel. Enjoy watching! A video of the DIY installation is available below:    • Rekuperacja – jak samodzielnie wykonać ins...   The device I chose is the Blast 630 - a ventilation unit with a counterflow heat recovery exchanger. Technical details can be found on the manufacturer's website: https://dzialkowyhobbysta.pl/r/x5f6g/... If you'd like to buy me a coffee, feel free to support me here: https://dzialkowyhobbysta.pl/r/sc58q/... And if you enjoy what I do, want to see behind the scenes and support the channel – you can join here: https://dzialkowyhobbysta.pl/r/dbw26/... I encourage you to subscribe to my channel:    / @działkowyhobbysta   I also invite you to visit my Facebook page:   / dzialkowyhobbysta   And Instagram:   / dzialkowyhobbysta