We FINALLY Have The Solution? - Nissan Patrol Y62 Rear Alignment

Here is a guide on how to install our Y62 Camber Adjuster Bolt Locking Kit, which can significantly decrease the likelihood of your Y62 Patrol’s rear end going out of alignment. This kit can be purchased on our website: https://patrolapart.com.au/product/ca... A common issue with the Nissan Patrol Y62 range is for the rear alignment to be knocked out of spec due to an impact. This could be caused by hitting a pothole while towing, 4WDing or simple day to day duties. This can cause premature tyre wear and poor handling. To align these vehicles, the eccentric bolt in the rear lower control arm rotates against the steel locating tabs on the K-frame. These tabs have a tendency to bend, which can cause alignment issues and make it difficult to bring the vehicle back into spec. To counter this, we have developed our own Camber Adjuster Bolt Locking Kits. These kits not only support the K-frame's locating tabs, but also lock the bolt head to prevent rotation. If you have any questions, please post your comments below or contact our Sales Team, always happy to help! [email protected] 03 9735 9099