เช็ดทำความสะอาดเครื่องปริ้น CANON G2000

Today, we're cleaning and wiping all printer models to make them look like new, including brands like: 1. Epson, 2. Brother, 3. Canon, 4. HP, etc. (This case uses the CANON G2000 as an example.) Equipment needed for cleaning the printer: 1. Glass cleaner (1 small bottle) (available at most convenience stores for 50-100 baht, depending on the store) 2. Steaklean (multipurpose cleaning cream) (1 bottle) (available at most convenience stores for 50-70 baht, depending on the store) 3. Small towels, small terry cloths, or 1-3 old clothes (available at most convenience stores and 20 baht stores for 10-50 baht, depending on the store) 4. 1-2 rolls of tissue paper (available at most convenience stores and 20 baht stores for 10-50 baht, depending on the store) 5. 1-2 pairs of rubber gloves (optional) If you don't have one, your hands will get dirty. (You can buy them at convenience stores and 20-baht shops. Prices range from 10-50 baht, depending on the store.) 6. 1 Phillips screwdriver (Phillips screwdriver) (You can buy them at convenience stores and 20-baht shops. Prices range from 10-50 baht, depending on the store.) 7. 1 old toothbrush (If you don't have an old toothbrush, you can use a new one. Or, if you don't have a toothbrush, you can use a paint brush or a hairbrush.) (You can buy them at convenience stores and 20-baht shops. Prices range from 10-50 baht, depending on the store.) If you want to disassemble the printer and clean it, you can do so at your convenience. However, I recommend that if you've never disassembled a printer before, I don't recommend doing it yourself. It's better to take it to a repair shop. However, if you want to do it yourself, it's up to you. Steps for Cleaning the Printer 1.1. If you want to disassemble the printer and clean it, you need to turn it on and check if it's working properly. 1.2. Next, run a test print to see if the printer is working properly. Then, disassemble the machine for cleaning. 2. Cleaning Procedures 2.1. Use a small towel, a small down cloth, or an old piece of clothing to wipe the machine clean first. 2.2. If there are any dust or dirt stains, use an old toothbrush. If you don't have one, use a paint brush or a hairbrush to scrub it off completely. 2.3. If there are any ink stains or dirt stuck to the machine, spray glass cleaner on the stained part of the machine, a towel, or tissue paper, and wipe it dry. 2.4. Use a multi-purpose cleaner, a small towel, a small down cloth, or an old piece of clothing to thoroughly clean the machine. 2.5. After cleaning, plug it in and turn on the machine to test printing to see if it works properly. Once the printer prints normally, you're done. ...Finally, I'd like to thank everyone who came to chat and watch. Please like, share, and subscribe. You can also follow me on YouTube: Channel: Repair Until Broken, Facebook: Repair Until Broken, Facebook: Repair Until Broken, Line ID: Repair Until Broken supatpongmono2535 (If you press it) I would like to thank you.... Or if you don't understand, please contact supatpongmono2535 Line ID https://www.facebook.com/profile.php?... #RepairUntilItBroken#PrinterRepair#CANON #CANON MP287#CANON G2000 #CANON G2010#PrinterCleaning#WipingCanonG2000PrinterCleaning#CanonG2000PrinterCleaning#CanonG2000Cleaning