Messen des Schutzleiterwiderstandes Gerätetester / Prüfgerät / Messgerät Fluke 6500-2 VDE 0701 DGUV

Measuring and testing protective conductor resistance 10A 200mA, as well as visual inspection, with the measuring device, test device for portable electrical equipment according to DIN VDE 0701 DIN VDE 0702 DGUV-V3, using the Fluke 6500-2 appliance tester. During the device training, we will show you how to perform and save the visual inspection with the Fluke 6500-2, and how to measure the protective conductor resistance at +-200mA and 10A. For cable reels, desktop distributors, and desktop sockets, the protective conductor must be tested/measured at all contacts! For this purpose, the measurement times can be set in automatic mode, and in manual mode, the measurement time can be set to continuous measurement. TIP: The resistance of a protective conductor depends on the cable length. A 1.5mm² copper conductor has a resistance of approximately 0.01 ohms. The measured protective conductor resistance for an extension cable should therefore not be 0.2 ohms, even if this would still be within the limit values ​​recommended by the VDE. The measured value for a 1 m 1.5 mm² cable can be around 0.01 to 0.03 ohms. If the measured value is higher, the tester either made poor contact, did not adjust the test lead, or there is something wrong with the device under test. Fluke 6500-2 portable appliance tester for testing and measuring according to DIN VDE 0701 / DIN VDE 0702 / DGUV-V3 / electrical equipment, electrical devices, mobile electrical devices. Device instruction for the Fluke 6500-2 appliance tester for measurements and tests according to DIN VDE 0701 / DIN VDE 0702 / DGUV-V3. What can you measure with the measuring device according to DIN VDE 0701: Visual inspection passed Yes / No Help screen Protective conductor resistance with +/- 200mA Protective conductor resistance with 10 A Insulation resistance with 250 or 500V Equivalent leakage current Differential current / load current Contact current PRCD test / Fi test Automatic test for cold devices / extensions / cable reels / table sockets Automatic test sequences Additionally: Measuring times can be set to continuous measurement in manual mode Measuring times can be set in automatic mode Color display with contrast adjustment i button = information button / help button Navigation buttons / cursor keys Setup = settings Alphanumeric keyboard USB connection e.g. for barcode scanner USB connection for direct PC connection and transfer of the measured values ​​to the test report software DMS The automatic test sequence allows you to carry out more measurements / tests a day with the Fluke 6500-2. The Fluke 6500-2 VDE 0701/0702 Appliance Tester is characterized by its low weight, small size, one-button operation, and fast, self-programmable automatic tests. This allows you to increase the number of tests on portable devices per day. With the 6500-2 Appliance Tester, measurements can be performed more quickly without compromising the quality of the results. Fast one-button operation on the Fluke 6500-2 VDE 0701/VDE 0702/DGUV-V3 Appliance Tester: Each of the preset test routines is accessed by pressing a single button. This is much easier than navigating menus or selecting multiple functions and enables faster and more efficient work. The 6500-2 model is also equipped with user-defined test routines and an alphanumeric keypad for fast data entry. The lightweight 6500-2 portable appliance tester is extremely compact and can be easily carried on site. The sturdy hard-shell case protects the device during transport and also offers space for accessories and other devices. This robust portable appliance tester is designed for field use. With a portable VDE measuring device from Fluke, you have a universal solution with all the functions for testing portable devices. Fluke 6500 VDE 0701 / VDE 0702 / DGUV-V3 Appliance Tester. Features at a glance: • One-button operation: each test function is initiated with a dedicated button • Preset pass/fail values ​​save time • Large backlit display for easy reading • Single AC outlet for device connection • Separate IEC outlet for easy testing of non-heating device leads • Detachable test leads for quick on-site replacement • Integrated carrying handle • USB port for data transfer • Integrated keypad for fast data entry • Saving measurement data to USB memory + transfer to a PC • Preset automatic test sequences for increased user-friendliness • Faster data entry thanks to integrated codes for location, measurement point, and description • Memory check function for more on-site control The Fluke 6500-2 Portable Appliance Tester package includes: • Fluke 6500-2 Portable Appliance Tester • User manual on CD • Quick start guide • Hard plastic carrying case • Test lead • Test probe • Alligator clip • Power cable Music: Luciano Foglia / Only please yourself / Creative Commons Attribution License