AVİZE MONTAJI (CHANDELIER INSTALLATION) #ledaydınlatma #avize

Tips to Make Installing a Chandelier Easier Before the installation process, it is necessary to know the features of the chandelier to be installed. For example, LED chandelier installation may be different from stony and ornate products. Therefore, before answering the question of how to install a chandelier, it is useful to understand where the product can be installed and what features it has. Before installing the chandelier, it is important to start by cleaning the relevant section on the ceiling. Because chandelier holders may not fit properly due to dust and construction debris on the ceiling. Cleaning the area where the chandelier will be installed will also minimize your exposure to dust. Using a portable ladder will be very useful both during area cleaning and chandelier installation. Of course, there should be no rugs, mats or other materials under the stairs that could cause slipping. Especially on parquet floors, such materials can cause you to slip very quickly. After taking the necessary precautions, you can carefully remove the old chandelier and proceed to install the new one. In this case, you may need to get help depending on the weight of the chandelier. When starting the chandelier assembly, this product; You need to pay attention to whether it has a hanging bracket, is attached to the wall, is made of LED or other materials. What you need to do when installing a hookless chandelier is to loosen the small screws attached to the wall. Afterwards, when it is understood that there is no electricity with the help of the control pen, the connections of the cables are disconnected. Then, the cables of the new chandelier and the cables on the ceiling are connected to each other. These methods are also used in the assembly of wooden chandeliers. Of course, these techniques are necessary when installing a chandelier on the ceiling. Hooks are generally used during drywall chandelier installation. This hook, placed inside the slot where the electrical installation is located, helps the chandelier to remain stable. Since plasterboard is light due to its structure, it is necessary to be careful that the chandelier chosen is not heavy. In addition, hookless chandelier installation, which is frequently encountered among lighting products, is also installed adjacent to the ceiling. For products with hanging brackets, it is necessary to take measurements beforehand. Afterwards, holes are drilled in the marked area with a hammer drill and dowels are attached. Then the apparatus screws are fixed to the dowels.