HOW TO USE A DIRT BIKE FLYWHEEL PULLER

Get a Flywheel puller here https://amzn.to/4wfHS7N Need to remove the flywheel on your Yamaha WR450F? In this video, I walk you through exactly how to use a flywheel puller on a 2004 WR450F step-by-step. Whether you’re replacing the stator, doing a top-end rebuild, or tearing into the engine, this guide will help you get the flywheel off safely without damaging anything. I’ll show you the tools needed, the proper setup, and a few tips to make the job easier. This method also applies to many Yamaha YZ450F and WR450F models. 🔧 Tools used: ✔ Flywheel puller ✔ Impact gun / ratchet ✔ Wrenches ✔ Basic hand tools If you found this helpful, hit LIKE and SUBSCRIBE for more dirt bike repairs, rebuilds, and backcountry wrenching adventures. #WR450F #YamahaWR450F #FlywheelPuller #DirtBikeRepair #MotorcycleMaintenance #Yamaha450F #DIYMechanic #BackcountryWrenching DISCLAIMER: Due to factors out of the control of BackCountry Wrenching and Bsk Garage, we cannot guarantee against improper use or unauthorized modifications of this information. BackCountry Wrenching and Bsk garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video and all other videos produced by BackCounty Wrenching and Bsk Garage. Use this information at your own risk. BackCountry Wrenching and Bsk Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackCountry Wrenching and Bsk Garage Be safe! This video and description contain affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!