Modifying Electrofrog turnouts for DCC layouts - a 10 step checklist with jigs and tips
If you can't get hold of Unifrogs for your DCC layout, this video shows the 10 steps required for modifying Peco Electrofrogs for reliable running on your DCC model railway. The video also demonstrates how some simple jigs can make the modification process much easier, reducing the risk of ruining your Electrofrog turnouts. You'll need access to a Dremel type cutting tool and some experience with a soldering iron. A PDF of the 10 step step checklist is available here: https://www.elfshot.com/n/download/te...
▶︎
DCC Wiring Made Simple | CCMR At The Bench #23
▶︎
How to lay flex track, tips and advice. Part3
▶︎
Insulfrog, Electrofrog, Unifrog--What's The Difference And Why Does It Matter? (263)
▶︎
Make Your Old Turnouts DCC Friendly (121)
▶︎
Making Simple Power Pick Ups For Old Locos And Passenger Coaches.
▶︎
DCC Bus Wiring at Chadwick Model Railway | 24.
▶︎
3 Manual Control Methods For Turnouts And Frogs (261)
▶︎
Cobalt IP Digital - DCC point motor control for model railways
▶︎
Model Railway Layout Part 4 - Points: Insulfrog / Electrofrog
▶︎
Modifying Peco Points
▶︎
Building Switch Machines From Servos for My Model Railroad
▶︎
Cork vs foam track underlay — plus a surprising third option
▶︎
PECO 3 WAY POINTS & MP10 POINT MOTORS at Chadwick Model Railway | 218.
▶︎
New Layout - Fitting Bus Wires And Droppers for Model Railway
▶︎
How To Wire A Model Railroad Layout For DCC
▶︎
Mechanical Point Control for Model Railways - the Quiet, Cheap, DIY solution
▶︎
51. Points DC and DCC, Fitting point motors and Eletrofrogs
▶︎
Wiring PECO N Scale Turnouts - Unifrog and Electrofrog - DCC
▶︎
FINALLY The Easiest DCC EVER! Blunami & Dead Rail!
▶︎