How to Replace Rear Driver Side Outer Bumper End 1996-2002 Toyota 4Runner

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-bz This video shows you how to install a rear driver side outer bumper end on your 1996-2002 Toyota 4Runner. This repair was done on a 2001 Toyota 4Runner SR5 3.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles: 1996 Toyota 4Runner 1997 Toyota 4Runner 1998 Toyota 4Runner 1999 Toyota 4Runner 2000 Toyota 4Runner 2001 Toyota 4Runner 2002 Toyota 4Runner Tools you will need: • 10mm Socket • 12mm Socket • 13mm Socket • Trim Tool Set https://trq.video/o8N-1AXXX00006 • Ratchet • Floor Jack • Jack Stands • Gloves https://trq.video/oYS-1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: Toyota 4Runner 3rd Generation 1996-2002:    • Toyota 4Runner 3rd Generation 1996-2002   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.