Winnebago Revel Suspension Upgrade & Leaf Spring Replacement

Is your Winnebago Revel sagging in the rear, or are you looking for the smartest 4x4 Sprinter suspension upgrade? 🚐💨 In this episode of Shop Life, Andrew walks you through a 2018 Winnebago Revel (built on the Mercedes-Benz Sprinter 4x4 chassis) that came in for its 100,000-mile preventative maintenance—only for us to discover a completely snapped rear leaf spring. Between 9 years of salty San Diego ocean air and the constant leverage of a heavy rear-mounted bike carrier, the factory spring gave up. Rather than throwing on cheap aftermarket leaf springs (which suffer from crushed bushings, as Andrew demonstrates at 5:28), or forcing the owner into a $10,000 extreme long-travel kit, we engineered the sweet spot: getting ~80% of the high-end performance at a fraction of the cost. 🛠️ The Revel Upgrade Setup: Rear Springs: Genuine Mercedes-Benz 2-layer leaf springs paired with an additional aftermarket Add-a-Leaf (+0.5" lift & heavy load support). Rear Shocks: Bilstein Heavy Duty shocks with external reservoirs (a rarely used, incredible setup for extra stiffness and heat dissipation). Front Axle: Bilstein struts, brand new tie rods, and new ball joints to replace the worn-out factory units. If you carry heavy gear on your Sprinter, check your leaf springs! Sprinter Van Solutions 📍 Visit Our Shop: 7754 Arjons Dr, Ste B, CA San Diego, 92126 📞 Call Us: (619)949-7564 📩 Email: [email protected] Dealer Quality. Local Prices. Engineered Solutions. 👉 Book your Sprinter service or custom build: https://sprintervansolutions.com #WinnebagoRevel #Sprinter4x4 #SuspensionUpgrade #Bilstein #SprinterVanSolutions #SanDiego #VanLife #MercedesSprinter #Overlanding #CamperVanMaintenance #LeafSprings 3 причины, почему это описание сработает на алгоритм: