Cleaning front and back lens group in Carl Zeiss Planar 80mm 1:2.8 for Hasselblad

In this film I will show how to Cleaning the front and back lens group's lens element's, in my old NON-T* Carl Zeiss Planar 1:2.8 f=80mm for Hasselblad lens. The front lens coating was not really good anymore, but the rest of the lens elements turn out to be okay. I use Eclipse lens cleaning fluid and PEC*PAD lens wipes. (I could also have used lighter fluid as lens cleaning solvent). Here are some link's to different repair tool's and lubricating stuff: "ORBIT" HEPA Blower: https://photosol.com/products/orbit-h... You can buy it here: https://www.adorama.com/cpkhjdb.html "Liqui-Moly" LM 50 Litho HT: https://www.amazon.co.uk/Liqui-Moly-L... "Liqui-Moly" LM47 MoS2 grease with Molybdenum disulfide: https://products.liqui-moly.com/lm-47... or on Amazon: https://www.amazon.co.uk/Liqui-Moly-3... Contact glue: https://www.loctiteproducts.com/en/pr... SpyderLENSCAL: https://www.datacolor.com/photography... Japan Hobby Tool rubber cone: https://www.amazon.com/Japan-Vacuum-C... 18 different size rubber repair tool's: https://www.amazon.com/Sizes-Lens-Fil... Divider Caliper Wing Compass: https://www.amazon.co.uk/Divider-Cali... You can also buy this set. Lens Repair Set with pointed, flat, half flat tips: https://www.amazon.com/dp/B00QRPWCN0/... JIS cross head screw driver's: https://www.amazon.com/Moody-Tools-58... Or this set, that is the set I use: https://eustore.ifixit.com/en/Tools/D... Lens cleaning wipes (PEC-PAD): https://www.amazon.com/dp/B0161VIZZ8/... Thin Cotton Buds x 200 you can buy them here: https://www.muji.eu/pages/online.asp?... DSLRKIT Pro Lens Vise Tool Repair Filter Ring Ajustment Steel 27mm to 130mm: https://www.amazon.com/DSLRKIT-Repair... Japan Hobby Tool Herical Grease Made in Japan: https://www.amazon.com/Japan-Hobby-He... Loctite 222 50ml Threadlocker https://www.amazon.com/Henkel-Loctite... And you will also need some Isopropylalcohol 99% And sometimes Lighter Fluid that is very good to clean lens element's. NOTE: Do NOT! use Acetone on platic part's, it will damage / melting the plastic!!!