Nie wieder festklebende Stützen! – 3D Druck Support leicht entfernen | Slicer Samstag #23

*🎓 3D Printing Academy: https://www.3dd-akademie.de – Become part of the community! *Discount code: Use the code "Lion" and save 10% on your membership permanently! ✅ Links from the video: 📝 Z-distance test models: 1: https://makerworld.com/de/models/8731... 2: https://makerworld.com/de/models/1916... 📺 Recommended video: Combining filaments (PLA & PETG):    • Der ultimative Support-Material Guide für ...   📂 Playlist: All Slicer Saturday episodes:    • Slicer Samstag   Recommended filaments: *PETG filament: https://amzn.to/4sARA2k *PLA filament: https://amzn.to/4vzZ5Jx Are you also struggling with support structures that seem to be stuck to your model like they're cemented on? In this video, I'll show you how to easily remove them with the right settings! Do you know that frustrating feeling when you've printed a beautiful model, but the support structures just won't come off properly? Often, half the part breaks, the underside looks messy, or you even injure yourself on the sharp plastic edges. It doesn't have to be this way! In this episode of Slicer Saturday, I'll explain in under 5 minutes how to solve this problem by correctly adjusting the upper Z-axis distance. We'll delve deep into the slicer settings and look at why the default distance is often insufficient. I'll show you the "sweet spot" of 0.25 mm, which usually makes removing supports wonderfully easy without the filament sagging. You'll also learn how to use special online tests to determine the perfect value for your specific material (such as PLA or PETG). As a special highlight, there's a bonus tip for everyone with a multi-material system or two nozzles: the combination of PLA and PETG. Since these materials don't chemically bond together, you can set the Z-distance to 0.0 mm and get a perfectly supported, smooth surface that separates effortlessly. Say goodbye to spaghetti supports and broken models! ⏱️ Chapters / Timestamps: 00:00 – The Problem: Sticky Supports & Broken Models 00:46 – Intro: Welcome to Slicer Saturday 01:03 – Partners: The 3D Printing Academy Introduces Itself 01:39 – Why Do Supports Stick So Tight? 02:08 – The upper Z-spacing explained simply 02:52 – Slicer tutorial: Enabling supports & adjusting values 03:53 – Finding the perfect value: Online tests for your material 04:33 – PLA vs. PETG: Material differences in support 05:12 – Bonus tip: Combining filaments for 0.0 mm spacing 06:26 – Professional settings for the support interface 07:20 – Summary & conclusion 07:52 – Your experiences: Share them in the comments! My Equipment 🛒 *My camera: Sony Alpha ZV-E10: https://amzn.to/420rxre 🛒 *My second camera: DJI Osmo Pocket 3: https://amzn.to/4r3y137 🛒 *My microphone: DJI Mic Mini: https://amzn.to/4hxctWC 📜 FTC DISCLAIMER: All links or discount codes marked with an asterisk (*) in the description of my videos are affiliate links. This means I receive a small commission on any purchases you make through these links. There are no additional costs for you; it's simply another way to support me and my channel! :-)