Turbro RV AC Ducted Install + Full 2000w Solar 24v Victron System Install In Keystone 5th Wheel

We took on a project that a lot of people say can’t be done. Buy Turbro RV AC - https://amzn.to/4caeGI1 This 5th wheel started with a standard RV air conditioner, and we upgraded it to a high efficiency inverter style unit that can actually run off solar. Along the way we also installed a 24 volt Victron system with 2000 watts of solar and built out a clean, serviceable power system. We also tackled something a little different… converting a non ducted air conditioner into a ducted system using custom fabrication. Not perfect, but it works, and we show exactly how we did it. You’ll see the full process from teardown to install, wiring, testing, and real world power draw. Spoiler: it pulls around 700–800 watts running. That’s a big deal. Also Bear makes an appearance. If you’re thinking about running air conditioning from solar, this is a good look at what it actually takes. Check out more installs and info at https://sotasolar.com Chapters 00:00 Intro and project overview 00:30 Removing the old AC unit 01:00 The “can’t be done” challenge 02:00 Inside the ducting setup 03:00 Installing the new inverter AC 04:30 Custom duct/plenum fabrication 06:00 Progress update and first fitment 07:30 Final duct shaping and sealing 08:45 First test run 09:00 Solar install on the roof (2000W) 10:00 Running cables and system layout 11:00 Building the power board 13:00 Component choices and design decisions 15:00 Bench testing and programming 17:00 Installing the system in the RV 18:00 Power up and system check 20:00 AC load testing (real numbers) 22:00 Thermal testing and heat checks 23:00 Final install and walkthrough 24:30 Night lighting and finished look