PERBEDAAN LAS MIG PAKAI GAS ArCo ( Argon 75% + CO2 25% ) DAN TANPPA GAS - VECTOR MIG185

Hi hello abs friends, this time I will discuss the difference between MIG welding using arco gas and without gas on the Vector Mig 185 welding machine. Before that, I will discuss how to set up this MIG welding machine, both those using arco gas and those without gas (gassless), how to attach the hose to the regulator, how to attach the regulator to the gas cylinder, how to heat the welding wire that uses gas, and those without gas or fluxcore wire, until trying to connect 45 degrees and 90 degrees. The most prominent difference that I experienced in looking for the Difference between MIG Welding using ArCo Gas (Argon 75% + CO2 25%) and Without Gas / Gassless - VECTOR MIG185 is, when using arco gas, there is very little smoke, while when without using gas, the smoke tends to be very much and we need to be careful with our breathing. Always use personal protective equipment, such as masks and others, as in this video I also use an auto dark welding mask, gloves, leather jackets all from Stahlwerk. there are also magnetic elbows and anti-spatter paste from Stahlwerk too In this video I also show when I patched a hole in a very large iron with a diameter of 13mm, and the results were good, it was successful and even very easy to patch a large hole in the iron using this vector mig185 welding machine. For friends who are curious about the mig welding products from this vector, you can follow Juragan Las Indonesia on Instagram here:   / juraganlas_id   Check the price of Mig Vector Welding: https://bit.ly/2MyXYcJ Want to treat ABS: https://sociabuzz.com/ayobikinsendiri... Visit the ABS Store: (Click the link above, or search on shopee "ABSMART")