REPARACION TRANSMISION A604 / 41TE (Armado parte 2) Dodge Chrysler | Rebuild Transmission

005 Transmission assembly A604, 41TE, 40TE, description of rebuild and necessary parts, measurements and tests A604, 41TE, 40TE, vehicles: Dodge, Plymouth, Mitsubishi, Jeep and Chrysler Support the channel: paypal.me/arturosegurap 💝 Subscribe: 👉    / @transmisionsegura   In this video: 0:00 Introduction 3:51 Measuring tolerances, changing seal and bushing, assembling the oil pump 16:42 Description of the generation of speeds from the Low/Reverse, 2/4 brakes and the Overdrive, Underdrive and reverse clutches 19:07 Description of the parts to be changed and their comparison 21:48 Review and change of lubrication system bushings 38:03 Piston assembly, input drum applications: Overdrive, Underdrive, Reverse 53:43 Description of friction discs, steel discs and application locks Underdrive, Overdrive, Reverse 59:43 Assembly and tolerance measurement in application drum 1:16:22 Pneumatic tests (with air) drum applications and TCC of the turbine This video describes the parts, their characteristics, measurements and tests are carried out to verify the correct operation of the assembly of the A604/41TE transmission in Stratus, it also applies to vehicles from 1989 to 2011 such as: Voyager, Neon, Avenger, Journey, Town Country, Cirrus, Eclipse, etc. The oil pump is disassembled to measure tolerances, on the internal rotor, external rotor and on the faces of the pump. Once inspected and cleaned, the bushing and seal are changed and sealed with Loctite 515 compound. Specifications for torque (tightening), change of metal pressure rings are presented, details of the inspection of the oil pump body and rotors are given to determine that they are in good condition. The assembly of the pressure rings is shown. It describes the operation of the transmission as the speeds are generated from the Low/Reverse, 2/4 brakes and the Overdrive, Underdrive and Reverse clutches. The new parts are described and compared to the used ones, such as safety rings, friction discs, steel discs, and they are measured to have their specification, the diaphragms (elastic spring), and the piston and piston tray are compared. underdrive as well as applications where Overdrive, Underdrive and Reverse discs are dragged. The operation of the lubrication system is described, the tolerances of the bushings are measured and in the case of the bushings, using tools such as vernier (caliper), telescopic, micrometer and alexometer, the damaged bushings are changed showing the extraction and replacement process. facility. The assembly of the application drum is described, where the diaphragm (elastic spring) is mounted, compressing it with the special tool, the installation of the nitrile pressure rings or lip rings, the safety rings with a description of their characteristics, especially the conical ring and its position. Friction and steel discs are compared, their measurement is carried out, as well as how it is possible to test steel discs and whether their reuse is feasible. The locks to change are selected by comparing them with the locks used, measuring their thickness, by the tip code. The application drum is assembled to measure the tolerances, once this is done it is disassembled for final assembly by moistening the friction discs in ATF, the position of the safety rings and pressure plates is described. Tests with air (pneumatic tests) are carried out on the Overdrive, Underdrive and Reverse applications, to observe their correct application, it is suggested to carry out tests at the different stages of assembly, not only at the end of assembly. Subscribe to the channel /@transmisionsegura, activate notifications, leave a comment and share it so that it is useful to more people. A604 transmission assembly 41te transmission assembly a604 41te transmission hits reconstruction a604 a604 repair automatic transmission a604/41te automatic transmission automatic transmission transmission does not shift a604 rebuild transmission change of bushings lubrication system how to test the turbine torque converter test application clearance measurement assembled input drum pump seal change How to know if the pump works overdrive application underdrive app reverse application rebuild kit a604 transmission wavy insurance how to install transmission locks Automatic transmission accumulator