Cara merakit Lampu TL LED 2 Lampu Sekaligus Yang Aman

This time, we'll show you how to assemble a TL LED lamp in a different way. This method of assembling a Philips TL LED lamp is safer, so you don't have to worry about installing the fluorescent lamp incorrectly. In this tutorial, installing a Philips TL LED lamp with two lamps is very easy, without having to pay attention to the markings on the TL LED. You can practice installing this TL LED lamp yourself. TL LED lamps are a type of lamp widely used in many areas of our lives. The term TL itself stands for "Tube Luminescent," or some also call it "Tube Lamp," which is a lighting lamp shaped like a "tube." In everyday life, we can find two types of TL lamp technology: Fluorescent (Neon) technology and LED (Light Emitting Diode) technology. The advantages of using fluorescent lamps equipped with LED technology are: Long lifespan (more durable) Energy efficiency Brighter light output Doesn't heat up easily Electricity costs are lower due to their low power consumption Environmentally friendly Due to the numerous benefits gained from using LED fluorescent lamps compared to fluorescent lamps, more people are choosing LED fluorescent lamps over conventional fluorescent lamps. In terms of price, LED fluorescent lamps tend to be more expensive, but considering the benefits, the higher price is certainly worth the advantages. For those of you who want to use LED fluorescent lamps, there are actually two types of LED lamps. With increasingly sophisticated and advanced technology, there are now LED fluorescent lamps that are integrated with the lamp housing and ready to use. However, if you happen to still prefer using LED fluorescent lamps without the housing, this article will discuss how to assemble an LED fluorescent lamp so it can be used. Tools Needed to Install LED Fluorescent Lights The supporting tools needed to install LED Fluorescent lights, as shown in this video, are: ‍1. Lampshade for Installing LED Fluorescent Lights Each lampshade is used according to its application. For example, using a lampshade on a sports field is certainly different from using it in an office. 2. Fluorescent Light Fitting The lampshade is then equipped with a lamp fitting. The fitting is installed in a specific way on the lampshade, making it easier to prepare for installation. A ready-to-use LED Fluorescent light is ready for use. 3. 0.9 mm Diameter Single Cable We need a cable to transmit electrical energy from the power source (for example, the electrical outlet in our home) to the lamp fitting, and then to the LED Fluorescent light. As seen in the video above, the cable we use is NYA with a diameter of 0.9 mm. This is because the size of the cable hole in the lamp fitting matches the diameter of the copper in the fitting's cable. 0.9 mm copper wire. Then, at the end of the cable, we stripped the cable sheath slightly, as shown in the video above. This way, the cable is ready to be connected to the lamp fitting. Next, the copper end of the cable is inserted into the hole at the bottom of the lamp fitting. The position of the hole can be seen in this video. Hole in the lamp fitting If the cable is properly installed in the fitting, it should not be able to be removed from the fitting. However, if it can still be removed, it means the cable is not properly connected to the fitting. This could be because the stripped cable sheath wasn't long enough. For a long cable, it's ready to be connected to a power outlet in our home that's powered by the state electricity company (PLN). As shown in this video, we adjusted the cable length to allow it to extend beyond the lamp shade, making it easier to connect to the installation cable we'll be using later. If the lampshade is as shown in the video above, with the fitting and cables assembled correctly, the LED fluorescent lamp is ready to be installed in the fitting. The LED fluorescent lamp is reversible. This means the LED fluorescent lamp is ready to be used to support your daily activities. #ipschannel #ledtube #lampuled #philips #ledtubelight