Come Collegare Correttamente il Puffer della Caldaia | LE PILLOLE

How to Properly Connect a Boiler Buffer Tank | QUICK TIPS Are you having trouble heating your home? Want to know which boiler is best for your home? ↓↓ THERE'S A FREE PROTOCOL MADE FOR YOU ↓↓ ✅ https://ilsoleintasca.it/scheda-dati-... ✅ If you're an installer, you already know how to connect a buffer tank to a pellet boiler. But if you're a regular person looking for practical information on how to do it, or if you have a pellet or wood boiler connected to a buffer tank that's not working properly, this video is for you. In just 2-3 minutes, Rudy and I will explain how to properly connect a buffer tank to a biomass boiler, including integrating solar thermal energy. Let's start with the basics: 1. Boiler Generator: The boiler has two pipes - flow and return. 2. Flow: The hot fluid exits the four-way valve and goes to the buffer tank, while the return line carries the cooled fluid back to the boiler. 3. Connection to the Boiler: The boiler flow line should be connected to the top of the boiler to immediately heat the upper part and serve the domestic hot water. The return line should be connected to the middle-lower part, where the solar thermal system operates. Rudy will show you the boiler flow and return connections to the buffer tank and the heating system. We'll also show you how to install the gate valves and dirt filter. The expansion vessel is connected to the coldest point of the boiler, and the drain is done from the lower tap. Finally, the solar thermal system should be connected to a specific point to work effectively even in winter, preheating the buffer tank water and reducing the boiler's workload. Watch the video to understand all the details and let us know what you think in the comments! Thanks to Rudy, and see you in the next video! Fill out the Technical Data Sheet and discover your BEST solution 👉 https://ilsoleintasca.it/scheda-dati-...